Probably Stolen Chemistry Guide
The temperatures, purity grades, Chem Module upgrades and Chemical Supplies packs behind chem production in Probably Stolen 1.0, as three Steam community guides and two gameplay videos describe them, with every disagreement left visible.
Keep Dream Cap and Nightmare Cap extraction below 50°C; holding the mush and alcohol at about 40–49°C is the safe window. The in-game Chemistry 101 guide is quoted as allowing up to 60°C, but players report losing mush to plant matter above 50°C.
Phanta needs an upgraded heating plate, because an unupgraded one stops at 99°C, and it must stay below 130°C, where Phanta breaks down.
Evidence level: Community reported Not site-tested Every gameplay fact here comes from Steam community guides or from what creators say out loud in 1.0 videos. None of it is developer documentation, and this site has not reproduced any of it in game. Where only two Steam guides agree, note that the larger one says it borrowed some reactions from the other, so they are not fully independent. Facts reported by a single guide are marked as such. Last verified: 2026-11-02, against sources dated 2026-10-30 to 2026-11-01 for game version 1.0.
Machines and Chem Module upgrades

Chem production runs through the same handful of machines: you blend the plant material into a container, heat it with a solvent on the heating plate, clean it, dry it in the evaporator and turn it into product in the Chem Finisher. A Composition Spectrometer shows what is in a container while you work. The screenshot above is the official Steam store image, so the values on its panels may not match your build.
Three machines take Chem Modules, and each module you add changes one thing. Two community guides give the same figures:
| Machine | 0 modules | What each module changes |
|---|---|---|
| Blender Community reported | Loses 35% of what you blend | Loss drops to 20%, 10%, 5% and finally 0% with four modules |
| Chem Finisher Community reported | Adds 12% contamination to every product | Contamination drops to 6%, 3%, 1% and finally 0% with four modules |
| Heating Plate Community reported | Target fixed at 99°C | One module raises the ceiling to 160°C; a second lets you set the target yourself; the third and fourth heat faster |
The 99°C ceiling on an unupgraded plate is also mentioned in CthuLuck’s 1.0 stream at 00:07:48. Because the plate on its own only aims at one target, both guides hold lower temperatures by switching it between Low and Off while watching the thermometer.
Getting the kit. Single source One community guide reports that the Retired Chemist referral, a network upgrade it prices at 1,000, hands you an older set of the chem machines together with the in-game Chemistry 101 guide. That guide is the same one read aloud in both videos below. The Chemist starting scenario, compared with the other starts on the starting scenarios page, is the other way into this line.
Purity grades and what they are worth
The Chem Finisher grades each product by its purity: the share of the active ingredient in the slice of the batch it uses, after its own contamination is added. Two community guides give the same seven bands and price effects, and a third separately ties 99% purity to the +135% top grade.
| Purity | Grade | Effect on value |
|---|---|---|
| 99% or more | Lab Pure | +135% |
| 90% to 99% | Pharma Grade | +85% |
| 80% to 90% | Near-Pharma | +40% |
| 60% to 80% | Street Standard | No change |
| 45% to 60% | Cut Product | −45% |
| 30% to 45% | Junk Grade | −75% |
| Under 30% | Starch Grade | −95% |
The finisher figures above set a hard ceiling. Our own arithmetic on the reported numbers: with no modules it adds 12%, so even a perfectly clean batch comes out at 88% at best, which is Near-Pharma.
Lab Pure: three finisher modules or four?
Sources disagree. Community reported The Complete Chemist Guide says Lab Pure needs all four finisher modules. Chemistry and You says four get you there reliably and three can, if your chemicals are clean enough. The numbers explain the split: three modules leave 1% contamination, so a flawless batch lands on exactly 99%, the Lab Pure threshold, and any impurity at all drops it to Pharma Grade. If Lab Pure is the goal, plan for four.
Recipe temperatures
Heat is where most batches go wrong, because several ingredients break down at temperatures the plate reaches easily. Two community guides agree on every limit in this table. The first row conflicts with the in-game guide, which is covered after it.
| Step or ingredient | Reported limit | What happens past it |
|---|---|---|
| Dream or Nightmare Cap mush in alcohol | Extract at about 40–49°C | Above 50°C the mush is reported to turn into plant matter. See the conflict below. |
| Dream Cap extract | Below 60°C | Breaks down above 60°C |
| Nightmare Cap extract | Below 50°C | Breaks down above 50°C |
| Alcohol | Up to 78°C | Evaporates above 78°C |
| Lipobond Agent | Up to 55°C | Evaporates above 55°C |
| Phanta reaction | Roughly 110–130°C; one guide recommends 120–129°C | Phanta breaks down at 130°C or more. Needs an upgraded plate. |
Chemistry 101 says 40–60°C. Players say stay under 50°C.
Sources disagree. Community reported In two 1.0 videos, creators read the in-game Chemistry 101 guide aloud, and it gives 40 to 60°C for turning cap mush into extract: CthuLuck at 00:19:30 and again at 01:03:14, and ProbablyNotMee at 00:11:16. This site has not seen that page in game itself.
Two Steam guides report something stricter. Both say Dream and Nightmare Cap mush degrades into plant matter above 50°C, so part of it never becomes extract. One recommends holding 40–49°C; the other switches the plate on and off to stay between 40°C and 44°C.
What to do: stay under 50°C. Everything from 40°C to 49°C is inside the in-game range and below the reported loss point, so the cooler window costs you nothing if the guides are wrong and saves mush if they are right. For Nightmare Caps the question is settled anyway, because the extract itself is reported to break down above 50°C. Our reading, not a sourced claim: the 60°C top of the in-game range lines up with where Dream Cap extract breaks down, which may be what the in-game text is describing.
How much each product takes
Two community guides give the same volume of finished, dry batch per unit in the Chem Finisher:
- Dream Dust: 2 mL per vial
- Nightmare Dust: 4 mL per vial
- Caffeine Pill: 5 mL per pill
- Phanta Pill: 0.5 mL per pill
- Nomore Injector: 4 mL per injector. How Nomore is made is left out of this page to avoid story spoilers.
Chemical Supplies packs: Common and Restricted
Chemical Supplies are the boxed packs that hold the reagents your recipes use. What is inside them is, so far, reported in detail by only one community guide.
| Pack | Reported contents | Other reported details |
|---|---|---|
| Chemical Supplies (Common) Single source | Two Mini Alcohol bottles, plus Lipobond Agent, an acidic solution and a basic solution | Base value 50. Sold by the Retired Chemist, scavengers and the Thief. A second guide confirms only that the acid and base come from this pack. |
| Chemical Supplies (Restricted) Single source | Two precursor bottles, each N-Methylol with Stabilizing Agent, and one Reducing Agent bottle | The ingredients for Phanta |
Two things about the bottles are better supported. All three community guides report that the acid and base bottles come with heavy metal mixed in and that nothing in the lab removes it. Two of them give the fix: check each bottle with the spectrometer and use the cleanest ones. All three guides say a water purification tablet only works when there is water in the container, so a dry mix with a tablet in it does nothing. For water itself, see the water guide on the Moisture Farm, the Water Merchant path and what is known about filtering.
Common mistakes
Each of these follows from the reported limits above; none has been tested by this site.
- Following the 60°C top of Chemistry 101. Heating cap mush past 50°C is reported to waste part of it as plant matter. Hold the 40s.
- Letting Nightmare extract or Phanta run hot. Nightmare extract is reported to break down above 50°C, Phanta at 130°C. Toggle the plate rather than leaving it on.
- Boiling off your solvent. Alcohol is reported to evaporate above 78°C and Lipobond Agent above 55°C, so a batch left on a hot plate can lose the liquid the reaction needs.
- Using too much acid or base. Both main guides dose the acid or base as close as they can to what the batch needs. Any excess stays in the batch and counts against purity.
- Grabbing the first acid or base bottle. Heavy metal from a dirty bottle cannot be removed later, which can be enough to miss Lab Pure.
- Finishing a wet batch. Both main guides say the Chem Finisher will not take a batch that still holds water, alcohol or Lipobond Agent. They differ on how small a leftover it tolerates, so evaporate it fully first.
- Dropping a purification tablet into a dry mix. It is reported to need water present to do anything.
Sources, version and what this page leaves out
This page reflects Probably Stolen 1.0. The Steam guides behind it were published or updated between 2026-10-30 and 2026-11-01; the most detailed says it was checked against build 100-Rev5. The two videos are 1.0 gameplay, and only what the creators say out loud is used, not numbers that appear on screen. Sources were last checked on 2026-11-02. A game update can change any of these values.
Left out on purpose: the Nomore recipe, which the game treats as a story reward; sale prices and contraband markups, which only one guide gives; and claims that no second source supports yet. Anything marked Community reported or Single source here moves up only once this site has a screenshot or a second independent report behind it.
Probably Stolen chemistry FAQ
What temperature do you need for Dream Cap extract in Probably Stolen?
Keep the mush and alcohol between about 40°C and 49°C. The in-game Chemistry 101 guide, as read aloud in two 1.0 videos, gives 40–60°C, but two Steam community guides report that Dream Cap mush starts turning into plant matter above 50°C, before it becomes extract. Staying under 50°C sits inside both ranges, so you lose nothing by running cooler. Nightmare Caps use the same range, and their extract is reported to break down above 50°C anyway.
What is in Chemical Supplies in Probably Stolen?
One community guide reports that Chemical Supplies (Common) holds two Mini Alcohol bottles plus Lipobond Agent, an acidic solution and a basic solution, has a base value of 50, and is sold by the Retired Chemist, scavengers and the Thief. The same guide says Chemical Supplies (Restricted) holds two precursor bottles (N-Methylol with Stabilizing Agent) and one Reducing Agent bottle, used for Phanta. A second guide confirms only that acid and base come out of the common pack. This site has not opened either pack itself.
How do you get Lab Pure in Probably Stolen?
Lab Pure is the top grade, at 99% purity or more. You need a dry, clean batch and Chem Modules in the Chem Finisher: with four, it adds no contamination of its own. With three it adds 1%, which caps a perfect batch at exactly 99%; one community guide says four modules are required, another says three can work if your chemicals are clean enough. Pick acid and base bottles without heavy metal, because nothing in the lab removes it.
What does each Chem Module upgrade do in Probably Stolen?
Per two community guides: in the Blender each module cuts how much of the input is lost, from 35% to 20%, 10%, 5% and then 0%. In the Chem Finisher each module cuts the contamination it adds, from 12% to 6%, 3%, 1% and then 0%. In the Heating Plate, one module lifts the fixed 99°C ceiling to 160°C, a second lets you set the target temperature, and the third and fourth make it heat faster.
What temperature does Phanta need in Probably Stolen?
Above what an unupgraded heating plate can reach. One community guide reports the reaction runs between roughly 110°C and 130°C, the other recommends holding 120–129°C, and both say Phanta breaks down at 130°C or more. Since a plate without Chem Modules tops out at 99°C, you need at least one module in it first.
Why did my mush turn into plant matter instead of extract?
The most likely cause, according to two community guides, is heat: Dream and Nightmare Cap mush is reported to degrade into plant matter above 50°C. Switch the plate between Low and Off to hold it in the 40s.
Related pages
- The Chemist starting scenario— how the chem start compares with every other 1.0 path.
- Water: Moisture Farm and Water Merchant— producing, buying and trading water: the Moisture Farm, the Water Merchant path and the testing and filtering that water sales require.
- Money and buying the store— how any income line feeds rent and the shop buyout.
- All published guides— the current index.
Sources
- The Complete Chemist Guide: Recipes, Purity and Profit — Steam Community guide — community guide, published 2026-10-30 and updated 2026-11-01, checked by its author against 1.0 build 100-Rev5; the source for the machine and module figures, purity grades, temperatures, volumes, both Chemical Supplies packs and the Retired Chemist referral. Its author says some reactions came from Chemistry and You.
- Chemistry and You, by The Exceptional Fisherman — Steam Community guide — community guide, 2026-10-30; the second source for the module figures, purity grades, temperatures and volumes, and the three-module view on Lab Pure
- How to create high purity acid and base — Steam Community guide — community guide, 2026-10-30; acid and base from the common pack, heavy metal in the bottles, purification tablets needing water, and Lab Pure at +135%
- CthuLuck — The WORST CHEMIST in the Cartel (Chemist Trader), YouTube — 1.0 gameplay video; reads the in-game Chemistry 101 guide aloud at 00:19:30 and 01:03:14, and mentions the unupgraded plate stopping at 99°C at 00:07:48
- ProbablyNotMee — Probably Stolen is Finally Out! And I Started Cookin’, YouTube — 1.0 gameplay video; reads Chemistry 101’s “40 to 60 C” at 00:11:16
- Probably Stolen on Steam — official game page and the source of the locally hosted machines screenshot